Eliet TL450 PRO Vacuum GX390
With this new TL 450 PRO, ELIET broadens its range of suction devices that can be loaded onto the trailer of a truck - the so-called Truck Loaders. This new and powerful Truck Loader meets the requirements of customers who are looking for a budget-friendly alternative.
The suction turbine with large diameter (450 mm) guarantees considerable suction capacity. In addition, both the suction hose and the discharge pipe have a 200 mm diameter, ensuring easy pass-through of the vacuumed material and practically excluding blockage. The cover on the suction turbine can be replaced in case of wear. The suction turbine is lined with rubber to dampen the thumping sound made by the vacuumed material.
SOUND-DAMPING TURBINE WALL
Every leaf or stone that is sucked up moves with the airflow through the suction hose until it hits the impeller. Centrifugal force throws everything against the wall of the turbine where it then follows the contours of the volute housing before ending up in the discharge hose. The turbine wall, therefore, acts as a type of drum that generates a lot of noise. However, ELIET have been able to efficiently absorb the noise from each impact by fitting a suitable rubber lining around the turbine.
TRANSPARENT SUCTION HOSE
The ELIET Truckloader is supplied factory fitted with a transparent flexible vacuum suction hose. The highly flexible suction hose measures 3.5 metres and is transparent. The suction mouth rests on a swivel caster, making it unnecessary to hold it up constantly. The light and transparent suction hose does not hinder the movement freedom and ensures you can immediately locate and remove obstructions in the hose. A special quick connect system makes for easy disconnection of the hose from the machine. When doing so, the associated safety device immediately switches off the engine.
Alternatively, one can opt for an “EasyhandleTM”: a suction mouth with two swivel casters and a moveable seat, providing the operator with even greater comfort. A support arm at 1.5 metres on the suction hose prevents it from dragging on the surface, eliminating any corresponding wear.
The propeller is attached to the crankshaft by means of a conical drill socket, making for easy dismounting.
Two sturdy grips enable two people to lift the machine and hook it onto the truck.
360° SWIVELLING DISCHARGE HOSE
The discharge hose with directional louvre has a diameter of 200 mm, just like the suction hose, which makes obstructions virtually impossible. The articulated hose made from welded wear-resistant steel components can swivel through 360°. The nylon pivot point is self-lubricating, so it never becomes blocked by dirt or rust.
The supports by which the machine is attached to the truck have adjustable feet with rubber soles.
The end of the discharge hose is equipped with a deflector flap in order to completely fill the loading space of a lorry. This flap can be adjusted to any angle. The shape of the flap ensures that the airflow does not immediately diverge when it leaves the discharge hose, thus making the airflow easier to direct.
The frame sits on two wheels that provide for easy manoeuvring and easy storage.
|Display SKU||MA 027 010 209|
|Model||MA 027 010 209|
|Output||Air Output: 108 m³/min / Noise Level: 112 dB(A)|
|Fuel tank capacity||12 L|
|Professional/ Domestic/ Hire||Professional / Overall Dimensions: 980 x 790 x 1520 mm|
GGM Groundscare are a specialist supplier of tractors, high quality professional groundscare machinery and after-sales support, dedicated to meeting the long-term requirements of our customers.
For over 40 years we have established ourselves as a leading Groundscare Machinery provider throughout the North-West of England and Yorkshire. Driven by a set of deep-rooted values, all staff at GGM take pride in building and nurturing customer relationships based on anticipating needs, problem solving and delivering on time, every time.
Whether your requirement is for sales, hire, spare parts or service - everybody at GGM is ready to help.
- HIRE SOLUTIONS - Finding an affordable solution is important now more than ever. GGM make this easier by complementing direct sales with a range of attractive and flexible hire packages. Customers can operate machinery at a fixed cost with the full support of the GGM service team. Whether you’re looking for an individual mower or a full fleet of equipment, GGM tailored hire packages are available for fixed term periods to meet a customer’s general requirement or to complete a specific one-off contract.
- SERVICE & TECHNICAL SUPPORT - GGM provides a responsive and reliable service offering to all our customers and contracts from our large state-of-the-art service and maintenance workshops in Colne and Haydock. Supported by our own fleet of mobile service vehicles to allow for on-site servicing and repairs, all of our experienced technicians are factory trained by our manufacturers to ensure our skill levels are maintained to enable us to continue to meet the changing demands of our marketplace. We aim to provide cost effective, reliable and flexible service support that is individually tailored to meet our customer’s needs while ensuring we continue to provide the best value for money.
- PARTS SUPPORT - With a team of experienced and knowledgeable staff, GGM provide reliable and consistent parts support on an ongoing basis, whilst at the same time having the ability to react quickly to minimise customer downtime. With a large stockholding of spare parts, we are able to ensure that customer orders are dispatched quickly and efficiently and all orders received before 3pm that are in stock are dispatched for next day delivery.
- QUALITY & ENVIRONMENT - Quality standards, personal safety and care for the environment are important to us all. At GGM, we are proud to be ISO9001 registered, ensuring that our customers receive the highest level of service and quality of products through our continual satisfaction programme. We manage health and safety requirements responsibly and we have achieved full accreditation under the CHAS contractors scheme. Additionally, looking after our environment is something that we take very seriously and we’re continuously looking for ways to reduce waste and recycle.