Eliet Maestro City Shredder (Hire Spec)

Description

ROBUST FRAME

Chipping wood is not a menial task. Here, a lot of power is unleashed inside the machine. A chipper only has a long operating life when no compromises are made in terms of quality and durability of the materials used. All of the ELIET chippers (small and large) are manufactured to the highest degree of craftsmanship. The Maestro City is just one example of this. The steel shredding chamber is firmly welded to the tubular frame. The feed hopper of the ELIET Maestro City has also been manufactured from steel.

LOW NOISE

In the interests of the environment, ELIET always try to obtain harmony between the machine and its surroundings. The shredding chamber has a double wall in order to reduce the noise pollution from this chipper. The frame wall sound damping material dampens the drumming effect of the chippings on the wall. This action reduces the noise level by several dB.

COLLECTION BAG

The fine chippings that the MAESTRO City spits out form the basis for what will later be nutritional compost. These chippings are immediately collected in a large collection bag so that not one single chipping is lost. The contents of one full collection bag (60 litres) is more than enough to fill one wheelbarrow. The chippings do not always have to be deposited in the compost container. They can also be applied as a fertile mulch layer underneath the plantings at the borders of your garden.

SIGHT-GLASS

There is a sight-glass in the top plate of the chassis so you can easily see when the bag is getting full

STANDARD CALIBRATION SIEVE

Thanks to its special shredding system, the Eliet Maestro can deal with not only thick branches but also fine pruning waste including that from hedges and shrubs with no problem. Also leafy-rich green waste from flower borders or vegetable gardens can be mixed in together. Even autumn leaves that have been collected up can be put through the shredder.

COMPACT STORAGE

In order to transport the Maestro easily in the boot-trunk of a vehicle, the feed-in chute can be completely removed. This is done simply with the turn of a hand, no tools are required.
This feature is also especially handy for storing the machine as compactly as possible in the garage or shed when the work is finished.